The fault of impact crusher always caused by incorrect operation and negligence in production, and it put back production badly. Now let we learn that how to reduce the fault rate of impact crusher.
Check before using
1. The checking of impact crusher before working is very important, such as check whether there is something in the crushing chamber, so to clean up immediately; check whether the safety device of impact crusher is appropriate, and strength safety in production.
(1).jpg)
2. Checking whether fastening bolts and other connectors is loose, foundations carrying machine is stabilized. If there is any impropriety, taking measures to reinforce them so as to ensure the smooth progress of production.
Cautions during production
1. Screening the materials entering impact crusher, and forbid oversize and too hard materials into machine. Using electromagnet device to absorb and filter the iron material, to eliminate non-crushing materials and reduce the fault rate of equipment.
2. Uniform feeding is better, which can prevent unilateral feeding too much and make the spindle bearing is balanced. On the other hand, it is forbidden that equipment work overload for a long time, and you can not make bearing rotating speed too high in order to blind pursuit yield, otherwise the spindle and bearings in a loading state for a long time will lead to impact crusher bearings spindle breaks and so on.
Source of this article：HX China edit：HX China
The locking spring of cone crusher is a safety device, which not only guarantee the normal crushing force, but also protect crusher from damage.
Return to the news center Back to home page
