The thermal system is the core of the kiln equipment, to build the whole system of the thermal system helps kiln enterprise analysis of the thermal performance of the equipment, review of rotary kiln system design and operation level, can provide scientific basis for technical modification and optimization operation. In production must be periodically for rotary kiln system for measuring, thermal and heat balance calculation. And what attention should we pay to rotary kiln thermal measurement?
.jpg)
1. First of all should comply with the thermal measurement purposes, secondly should make the selected system interface of each measurement project measurement and can be easily.
2. Measuring item should be determined by heat balance payment project, and the assessment of needs analysis thermal technical indicators. Site specific hole position should be according to the actual situation, representative of measuring points.
3. During the determination of rotary kiln system must operate properly, thermal stability, reflect the equipment at ordinary times normal levels.
4. Under the condition of rotary kiln system normal operation, simultaneous to continuous measurement, measuring time should be continued for three best class, generally should not be less than class two.
5. The measurement should be carried out according to the national standard.
8. Heat balance calculation, material balance and heat balance of the total balance of absolute value accounted for the proportion of the total amount shall not be greater than 5%, otherwise determine invalid, reasons should be analyzed and measured.
Source of this article：HX China edit：HX China
The design of the crushing chamber affects the crushing effects and the production efficiency of jaw crusher. So the reasonable crushing chamber is a necessary condition to improve the working performance of the equipment.
Return to the news center Back to home page
