As a heavy mining equipment, the running of cone crusher mainly depends on the motor. After a period of time, we had better replace the motor, because the motor is easy to be harmed. Recently, our customers ask that how to replace the motor of cone crusher, in order to facilitate more users, today, Hongxing cone crusher manufacturer explain methods to replace the motor in detail.
(2).jpg)
Firstly, remove the motor. When remove the motor with electric brush, we should take out the electric brush from brush holder of cone crusher. If we remove the straight-flow motor, we should make a mark in the middle of electric brush lest correspond by mistake.
Secondly, remove coupling and belt pulley. Before remove the coupling and belt pulley, we should smear some lubricating oil into the crack of the motor in order to facilitate to remove. If the axle and steel is rigorous, we should heat the steel firstly and encase the spindle with the wet cloth, and then take down the belt pulley.
Last but not least, remove the rotor. When remove the rotor, pay attention to do not touch the stator coil. If the rotor is not heavy, we can take out with our hands. If it is very heavy, we need to take it out with professional hoisting equipment. Hanging the steel wire rope in the ends of rotor, sling the rotor with hoisting equipment and gradually move out it. Pay attention to prevent damage the stator coil.
Source of this article：HX China edit：HX China
Ore flotation machine can guarantee those ore particles with large density and big granularity suspending and facilitate the insoluble suspensions to disperse.
Return to the news center Back to home page
