What if There Is Oil Leak of the Sand Dryer?

As is known to all, in general, by engine oil can machines like the sand dryer be started? Hongxing Heavy Machinery, as a professional ore processing machinery manufacturer, here, will talk about some solutions of the oil leak of the sand dryer in the usage process. If there is oil leak, the sand dryer cannot be in the normal operation, which should be disposed immediately.

The sand dryer is a kind of drying equipment used to dry wet sand. In the operation of it, there may be oil leak. In order to guarantee the safe production of the sand dryer for users, Hongxing, here, will talk about the oil leak of it in the operation process. Then, what can we do to deal with the oil leak of the sand dryer?

In the operation of the sand dryer, once there is oil leak, you can expand the diameter of the oil spit hole, which can ensure the smooth bearing bush and less jam, which can lower the possibility of oil leak. When the oil spit valve is big, the oil spit amount is big. To deal with this problem, the professional technicians should be asked to adjust the oil amount of the oil jet tube.

There can be the oil-proof rubber plate between the drum oil slinger and the oil spit hole to keep the oil from splashing out of the oil ring. For example, after a period of time of the operation of the machine, the oil hole on the oil jet tube gets stuck by the material or dust. At the moment, the oil pressure inside the oil tube increases and the oil spitting amount of the spit hole, close to the oil slinger, increases, which make the oil splash out of the oil slinger to cause oil leak. Therefore, in addition to the experts' adjustment of the oil amount of the oil jet tube, it is also very important to unblock the oil spit hole.

Source of this article：HX China edit：HX China